Brand A-Z

Badger Ordnance (1 to 16 of 20)


:
:



Badger Ordnance 308 Ar Gen 3 Ambidextrous Charging Handle

Badger Ordnance 308 Ar Gen 3 Ambidextrous Charging Handle

The 7.62 Gen 3 Ambidextrous Charging Handles from Badger Ordnance have an oversized design to provide easier manipulations. These charging handles allow for use of either the finger and thumb grip or the palm of the hand to be used to charge the rifle...

98.99

Badger Ordnance 700 Long Action Tactical Bottom Metal

Badger Ordnance 700 Long Action Tactical Bottom Metal

Heavy duty, steel replacement for the aluminum factory part. Gives additional strength and durability to tactical use rifles. Oberndorf-type floorplate latch holds secure yet provides rapid unloading of loaded magazine. Front and rear tangs are thicker...

345.00

Badger Ordnance Angle Cosine Indicator Mount Gen Ii

Badger Ordnance Angle Cosine Indicator Mount Gen Ii

Machined Aluminum mount allows you to mount the Sniper Tool Designs Angle Co-Sine Indicator (ACI) directly to your MIL STD 1913 mount. Attaches with 2 soft point set screws so it will not mar your mount. Also fits M16/AR-15 flat top rifles. Mil Spec Anodized...

59.99

Badger Ordnance Ar .308 Micro Muzzle Brake 30 Caliber

Badger Ordnance Ar .308 Micro Muzzle Brake 30 Caliber

At just 1 3/4" long, this high-performance muzzle brake adds minimal bulk to the muzzle. Left and right side ports vent gasses evenly to reduce felt recoil and muzzle rise enabling quicker, more accurate follow-up shots. Underside is solid to eliminate...

94.99

Badger Ordnance Ar-15 Gas Block Mk12

Badger Ordnance Ar-15 Gas Block Mk12

Slim, low-profile replacement for factory front sight gas block provides maximum clearance for optics and free-float handguards. Streamlined profile reduces forward weight and improves your rifle's appearance. Set screws, gas tube mounting pin, and installation...

65.00

Badger Ordnance Ar-15/M16 Enhanced Bolt Catch

Badger Ordnance Ar-15/M16 Enhanced Bolt Catch

The Enhanced Bolt Catch is designed with a larger profile for easier manipulation in releasing the bolt, better ergonomics for left handed shooters who use their index finger to release the bolt, and more area to catch when locking the bolt open. Mfg:...

49.99

Badger Ordnance Ar-15/M16 Gen 3 Ambidextrous Charging Handle

Badger Ordnance Ar-15/M16 Gen 3 Ambidextrous Charging Handle

The 5.56 Gen 3 Ambidextrous Charging Handles from Badger Ordnance have an oversized design to provide easier manipulations. These charging handles allow for use of either the finger and thumb grip or the palm of the hand to be used to charge the rifle...

94.99

Badger Ordnance Ar-15/M16 Gen Ii Tactical Latch

Badger Ordnance Ar-15/M16 Gen Ii Tactical Latch

Mid-sized latch for those who want a size between standard and oversized. Makes the charging handle easier to find for brisk operation with the left hand without protruding too far. Works on all AR-15/M16-type rifles including the AR-10 and SR-25. Easy,...

19.99

Badger Ordnance Ar-15/M16 Tactical Latch

Badger Ordnance Ar-15/M16 Tactical Latch

Oversized for quick access from all shooting positions. Allows brisk, easy operation with left hand. Makes the charging handle easier to find and operate, especially on scope-mounted flat top receivers. Great for three gun shooters; expedites reloads...

17.99

Badger Ordnance Ar-15 Micro Muzzle Brake 22 Caliber

Badger Ordnance Ar-15 Micro Muzzle Brake 22 Caliber

At just 1 3/4" long, this high-performance muzzle brake adds minimal bulk to the muzzle. Left and right side ports vent gasses evenly to reduce felt recoil and muzzle rise enabling quicker, more accurate follow-up shots. Underside is solid to eliminate...

94.99

Badger Ordnance Bolt Action Oversized & Extended Bolt Knobs

Badger Ordnance Bolt Action Oversized & Extended Bolt Knobs

Oversize diameter and extended length and give positive bolt control for fumble-free cycling of tactical and benchrest rifles. No more holding the bolt handle with two fingers to clear the scope bell. Provides additional leverage needed to clear stuck...

34.99

Badger Ordnance Fte Muzzle Brake 20 Caliber

Badger Ordnance Fte Muzzle Brake 20 Caliber

The FTE Muzzle Brake is a clamp on style brake and can be easily removed for cleaning or for installation of a suppressor. Ports to each side and a wide lower portion reduce ground blast. Large expansion chambers make this a very effective brake for a...

134.99

Badger Ordnance M14/M1a Bolt Roller Greaser

Badger Ordnance M14/M1a Bolt Roller Greaser

CNC machined tool forces grease in and around the hard to reach areas of the bolt roller to insure optimal performance and dependability. Easy to use, simply fill the cupped end with rifle grease and push onto the roller for complete lubrication. Durable...

6.99

Badger Ordnance M14/M1a National-Match Spring Guide

Badger Ordnance M14/M1a National-Match Spring Guide

Hardened, tempered, one-piece, steel spring guide stands up to wear and warping for improved cycling. Cylinder rod provides 360-degree contact with the spring to diminish binding problems; fluted to reduce spring drag. Drop-in part installs easily. Mfg:...

42.99

Badger Ordnance M1/M1a Receiver/Barrel Timing Gauges

Badger Ordnance M1/M1a Receiver/Barrel Timing Gauges

Machined aluminum gauges give a precise, repeatable indexing reference so front and rear sights can be aligned perfectly, every time. Front gauge attaches to the gas cylinder (M1) or flash suppressor (M1A); rear gauge fits in the stripped rear sight housing....

79.99

Badger Ordnance Mini Fte Muzzle Brake 22 Caliber

Badger Ordnance Mini Fte Muzzle Brake 22 Caliber

The Mini FTE is a clamp on style muzzle brake so there is no modification to your threaded barrel required. Available for either .22 calibers, muzzle brakes have 5/8-24 threads and .875" muzzle diameter. Fit by a competent gunsmith recommend. Mfg: Badger...

125.00