Brand A-Z

Starrett (1 to 16 of 16)


:
:



Starrett 12 Oz. M1 Oil - Aerosol Can

Starrett 12 Oz. M1 Oil - Aerosol Can

Starrett M1 Lubricant produces a micro-thin, airtight film/coating which dries fast. It will not pick up dirt and grime that wet lubricants attract. The can will spray upside down or sideways, superior lubricating with no silicone, penetrates under dirt...

7.99

Starrett 1911 Slide Rail Micrometer

Starrett 1911 Slide Rail Micrometer

For match level accuracy, slide-to-frame fit on 1911-style au- tos must be closer than a gnat's whisker. This specially modified Starrett mike precisely measures the thickness of the slide's "rails". Makes choosing the correct slide fitting bar quick...

269.99

Starrett #565 Pin Punch Set

Starrett #565 Pin Punch Set

Precision ground from specially selected tool steel, hardened and highly polished, the Starrett Pin Punches are well proportioned and beautifully finished. Blued, knurled grip area; individually marked for size. Set of all 8 punches comes in handy, fitted,...

5.99

Starrett 6" Dial Caliper

Starrett 6" Dial Caliper

A precision tool that handles all the required measurements; inside, outside, depth and steps. Stainless steel frame and slide, including the "down-pointing" rack teeth that shed dirt and chips. Dial registers .100" per revolution, the wide graduations...

208.99

Starrett #98-6 Precision Level

Starrett #98-6 Precision Level

A precision instrument for setting up lathes, milling machines, drill presses, sight fixtures and more. Seasoned casting; highly-polished bearing surfaces; grooved base to handle round work; integral cross-test level. Mfg: Starrett SPECS: Movement of...

139.99

Starrett Angle Meter

Starrett Angle Meter

High-impact polymer angle meter is ideal for leveling, setting and verifying the proper angle on milling decks, drill press vises, surface grinders, and stock duplicators. Features a large, easy-to-see scale for accurate measurements from 0 to 90 degrees...

19.95

Starrett Automatic Center Punch

Starrett Automatic Center Punch

Automatic, one hand operation leaves the other hand free to steady the work. Fully adjustable for strength of impact. All working parts are hardened. Mfg: Starrett SPECS: Steel. 3-53/64" (9.7cm) long. .405" (10.3mm) diameter. 1 1/2" oz. (42.5g). Knurled...

6.49

Starrett Circular Bubble Level

Starrett Circular Bubble Level

This Starrett bubble level is great for ensuring your reloading tools (especially scales) are on a nice level surface. Mfg: Starrett

2.99

Starrett Depth Micrometer

Starrett Depth Micrometer

Unique, flat rod fits into slots and grooves as narrow as .045" and measures depth from 0" to 3". Rotates, doesn't turn with the spindle, can't "walk" or roll off an edge. Reads to .001" ratcheting knob, base and three, hardened ground and lapped rods....

309.99

Starrett Precision Screwdriver Set

Starrett Precision Screwdriver Set

This set of 7 precision 551 Series screwdrivers from Starrett includes 4 straight bladed drivers from .060 inch to .120 inch and 3 Phillips drivers from 1 to 00. All blades have vapor chromed, hardened tips and tapered, ergonomic handles. Handle tops...

64.99

Starrett Punch Set

Starrett Punch Set

Every handloader and gun enthusiast should have a set of high quality punches. Starrett pin punches are made of centerless ground, hardened tool steel for long-lasting life. Each punch has a round knurled handle and is clearly marked for size. Punches...

63.99

Starrett Small Hole Gage Set

Starrett Small Hole Gage Set

The inside diameter of small holes is very difficult to measure accurately without hole gages like these from Starrett. The hardened ball measuring surface on each tool has a radius less than the minimum diameter to be measured so accurate two point contact...

174.99

Starrett Taper Pin Starter

Starrett Taper Pin Starter

This tool's radiused face matches the end of the front sight housing taper pin to prevent damage during removal. The taper pin is removed by driving from left to right; the small end is on the left side of the barrel, the large end is on the right side!...

12.99

Starrett Tap Wrenches

Starrett Tap Wrenches

Precision-made tap wrenches help you apply the exact amount of leverage needed to cut straight, true threads for scope bases, finish ream chambers, and drill or deburr holes. Easy-to-grasp, knurled collet tightens securely around the tap, reamer, or drill...

36.99

Starrett The Starrett Book For Students Machinists

Starrett The Starrett Book For Students Machinists

Edited and authored by George Morris. 160 pages. 4-" x 7". Softbound. Written especially to assist the student machinist in learning the fundamentals of all good mechanical work, and provided with the tables and reference material most needed by both...

18.99

Starrett Tool And Instrument Oil

Starrett Tool And Instrument Oil

This is the same lubricating and preservative oil used on Starrett tools before shipment from the Starrett factory. Provides through lubrication of close fitting parts, and is the ideal oil for fine machine parts, fishing and sports equipment, sewing...

10.49